Here’s how Budget 2019-20 will impact Automobile Industry of Pakistan

The first federal budget of the government of Tehreek-e-Insaf (PTI) is unveiled in the National Assembly which is a combination of good and bad news for the automobile sector of the country. The main highlight of the federal budget 2019-20 as far as the automobile sector is concerned, has been the expansion of the scope of Federal Excise Duty (FED) on different categories of locally manufactured/assembled cars. The proposed FED in accordance with each category is mentioned below. Previously, the government had imposed 10% FED on locally manufactured cars of 1700 cc engine displacement and above through the Finance Supplementary Bill 2019. It was also considered that the government is looking to withdraw this 10% FED in its first budget but things have gone differently. The proposed imposition of FED has only expanded the scope of taxation by bringing all the categories of cars under some amount of duty. Note here that the cars between 1700 cc and 2000 cc will now be charged with 5% FED rather than the old 10% FED. Moreover, 10% FED on cars over 2000 cc will also be reduced to 7.5% according to the latest proposed duty. It means that all the potential buyers of cars over 1700 cc ...

The best active seating for your office you can buy

I tested the Varier Move myself, and can confidently say I felt an immediate improvement in my posture. As a writer, I spend hours in front of the computer, and it can be all too easy to get lost in a project and realize that a couple of hours have gone by before I’ve moved. While it did take some time to adjust to, and I still had to remind myself to sit up straighter at times, my back felt a lot better after using the Varier Move. The lightly curved base also allowed me a good deal of mobility, but is sturdy enough that I never felt like I was going to tip over on it. The Varier Move is NEAT (Non-Exercise Activity Thermogenesis) certified by the Mayo clinic, which means it will allow you to burn more calories even while sitting. While this is by no means a total replacement for getting up and walking around, it’s far better than sitting hunched over in your traditional desk chair. The top of the stool is reminiscent of a bike seat (although a much larger and more cushioned one) and you sit with your feet planted and your legs splayed slightly open, which in turn opens your hips and keeps your core and your leg muscles engaged. While this style of sitting is amazing...

Global Luxury Mega-yachts Market has been revealing an escalating performance from the last couple of decades

Global Luxury Mega-yachts Market has been revealing an escalating performance from the last couple of decades with a heavy yearly … Global Luxury Mega Market has been revealing an escalating performance from the last couple of decades with a heavy yearly … Eggs Tray Machine, Eggs Tray Making Machine, Egg Carton Making Machine – FuChang,https://www.fcmachines.com/

2019 Summer TV Shows: 25 Must-Watch Series and Premiere Dates

School’s out, the air conditioning is on — to perhaps environmentally unsustainable levels — and your remote is right beside you on the couch. It’s summer, and while we all encourage you to partake in some watching of sportsball, there are also plenty of engaging shows debuting and returning on networks, cable, and our favorite streaming outlets. (And it’s much safer to stay inside than going to some dodgy pagan solstice festival, or something.) Here are IndieWire’s picks for the shows that are cooler than cool to watch during the hot summer months: Sign Up: Stay on top of the latest breaking film and TV news! Sign up for our Email Newsletters here. This Article is related to: Television and tagged Stranger Things 3, Summer Preview 2019, Veronica Mars Closed Cooling Tower, Heat Exchanger, Air Source Heat Pump – Lisheng,https://www.zjlis.com/

The 13 Best Workout Leggings for Running and Yoga 2019 Search Close Search Close

Every product is independently selected by (obsessive) editors. Things you buy through our links may earn New York a commission. The athleisure bubble shows no sign of bursting yet, and whether you prefer to wear leggings strictly during a gym session or wear them as everyday pants, we know how hard it is to find a nice-looking, comfortable, and affordable pair. And which ones will stand up to a good workout? Here, 11 fitness pros and instructors of classes from sweaty HIIT to meditative yoga weigh in on their favorites. A relative newcomer to the workout-wear scene, Australian brand Lilybod received shout-outs from two of our experts. Tatiana Lampa, who teaches HIIT classes at Fithouse, says, “They make your legs look nice, make your butt look good, and hug you the right way.” They’re also a favorite of Dianna Falzarano’s, director of TRX programming at Flex Studios. She likes that they’re “a thin material but not see-through, and they really keep their shape when you wash them.” She’s had one pair for three years and says they still look as good as new. Plus, the moisture-wicking fabric ensures that they won’t show — or smell like — sweat. Lampa and Falzarano are also fans of...

The average FDM 3D printer is not so different from your garden variety laser cutter. They’re

The average FDM 3D printer is not so different from your garden variety laser cutter. They’re often both Cartesian-coordinate based machines, but with different numbers of axes and mounting different tools. As [Gosse Adema] shows, turning a 3D printer into a laser cutter can actually be a remarkably easy job. The build starts with an Anet A8 3D printer. It’s an affordable model at the lower end of the FDM printer market, making it accessible to a broad range of makers. With the help of some 3D printed brackets, it’s possible to replace the extruder assembly with a laser instead, allowing the device to cut and engrave various materials. [Gosse] went with a 5500 mW diode laser, which allows for the cutting and engraving of wood, some plastics and even fabrics. Unlike a dedicated laser cutter there are no safety interlocks and no enclosure, so it’s important to wear goggles when the device is operating. Some tinkering with G-Code is required to get things up and running, but it’s a small price to pay to get a laser cutter on your workbench. We’ve seen [Gosse]’s 3D printer experiments before, with the Anet A8 serving well as a PCB milling machine. is it really that hard to modify 3...

Pressure Gauge Market Opportunities, Developments, Market Size and Future Forecasts To 2024

Pressure Gauge Global Market 2019-2024 covers market characteristics, size and growth, segmentation, regional breakdowns, competitive landscape, market shares, trends and strategies for this market. Global Pressure Gauge Market report provides strategists, marketers and senior management with the critical information they need to assess the global Pressure Gauge sector. The market size section gives the Pressure Gauge market revenues, covering both the historic growth of the market and forecasting the future. Access Global Pressure Gauge Market Research Report Details at: at https://www.pioneerreports.com/report/124637    The overviews, SWOT analysis and strategies of each vendor in the Pressure Gauge market provide understanding about the market forces and how those can be exploited to create future opportunities. Request for Sample Copy of this Pressure Gauge Market Report at https://www.pioneerreports.com/request-sample/124637  Important application areas of Pressure Gauge are also assessed on the basis of their performance. Market predictions along with the statistical nuances presented in the report render an insightful view of the Pressure Gauge market. The market study o...

Greenest Insulation Products for the Home | Earth911.com Greenest Insulation Products for the Home

Pliny the Elder was the first to write that home is where the heart is, but many older homes are drafty and have cold floors and uneven temperatures that can chill an environmentally aware heart. Do you remember the nursery rhyme about a cold, old house where even the mouse is cold? The good news for the mouse and anyone else concerned is that there are many weatherization products on the market to make homes more comfortable and energy efficient. Insulation is one of them. You might think that any insulation product that lasts decades and saves a decent amount of energy would be green. Unfortunately, many of the home insulation products on the market contain potent greenhouse gases or release chemicals, degrading indoor air quality. Home heating and cooling are responsible for nearly half of all home energy use. Insulation is important because heat flows from warmer to cooler spaces until there isn’t a temperature difference. In the winter, heat flows from heated spaces in homes to unheated attics, basements, garages and the outdoors. In the cooling season, heat flows from outside the home to the interior. Insulation stops the flow of heat.  Insulating the attic is a top priori...

Global Commercial Three Phase Smart Meter Market Report is a profound compilation of analysis that ascertains

Global Commercial Three Phase Smart Meter Market Report is a profound compilation of analysis that ascertains the size of global … Bathroom Vanity, Bathroom Cabinet, Bathroom Furniture – Langle,https://www.longerbath.com/

Industrial laser developments in China’s Wuhan Optical Valley

After decades of development, China’s laser industry has become a high-tech industry with industrial scale. After decades of development, China’s laser industry has become a high-tech industry with industrial scale. Domestic laser enterprises are mainly distributed in the provinces of Hubei, Beijing, Jiangsu, Shanghai, and Shenzhen, with four laser industrial bases centered in them—the central China base, Bohai Region base, Yangtze River Delta base, and Pearl River Delta base, which have about 300 enterprises combined. Our estimate of the output value of the 2015 laser industry is nearly 80 billion yuan (about $12.2 billion), including 35 billion yuan (about $5.3 billion) from laser equipment and 45 billion yuan (about $6.8 billion) from the heavy, electronic, light, medical treatment, and military industries. The major laser industry enterprises in Wuhan are HG Laser, Chutian Laser, Unity Laser, Golden Laser, and Raycus Laser. Shenzhen’s major enterprises are Han’s Laser, Sunshine Laser, GD Laser, and UW Laser; in Beijing, there is Daheng Optics and BIOET11; and in the east of China, there is Unity Prima and Eastern Laser. The eight Chinese-listed laser...

OMS Completes Pipe Measurement and Fit-Up Analysis Work on Julimar

We use them to give you the best experience. If you continue using our website, we’ll assume that you are happy to receive all cookies on this website. Optical Metrology Services (OMS) has successfully completed pipe measurement and fit-up analysis work for BAE Systems on the Woodside-operated Julimar Project, comprised the Julimar and Brunello natural gas fields. In April 2015, Woodside acquired a 65% interest in the Julimar Project. The appointed offshore installation contractor, EMAS-Chiyoda Subsea, subsequently engaged BAE Systems Australia in August 2015 to carry out fabrication, testing, trial lift and loadout of 10-off subsea tie-in and jumper spools. This consisted of 18in 625 CRA-clad, 14in / 8in / 4in super duplex stainless-steel and 4in carbon steel materials before installation by the EMAS-Chiyoda Subsea construction vessel, ‘Lewek Constellation’. BAE Systems subsequently contracted OMS who travelled to BAE Systems Henderson fabrication yard, 45min south of Perth in Western Australia during November 2015 to measure the 18in and 14in line pipe and bends, and provide detailed ovality analysis for optimum material nesting to ensure compliance with the projects max...

Global Blow Moulding Machine Market Outlook 2019-2026: Sidel , Sipa, Jomar, SMF, Krones, Bekum, Graham Engineering, KHS

The report on the global “Blow Moulding Machine market” offers detailed data on the Blow Moulding Machine market. Elements such as dominating companies, classification, size, business atmosphere, SWOT analysis, and most effectual trends in the industry are comprised in this research study. In this report, the global Blow Moulding Machine market is valued at USD XX million in 2018 and is expected to reach USD XX million by the end of 2025, growing at a CAGR of XX% between 2018 and 2025. In addition to this, the report sports charts, numbers, and tables that offer a clear viewpoint of the Blow Moulding Machine market. The dominant companies Sidel (Tetra Laval), Sipa, Jomar, SMF, Krones, Bekum, Graham Engineering, KHS, Aoki Technical Laboratory, Magic, Kautex (Textron), Automa, BBM, Techne Graham, Uniloy Milacron (Milacron), Mauser, Plastiblow, Parker, Chia Ming Machinery, Meccanoplastica, Multipack, Fong Kee, Pavan Zanetti, Wilmington are additionally mentioned in the report. Get Free Sample Copy Here @: http://www.marketresearchstore.com/report/global-and-united-states-blow-moulding-machine-market-283257#RequestSample The latest data has been presented in the global Blow Moulding...

12345 Next > >> Page 1 / 5